Premium 4-Port IP-Based PDU With Web GUI + Phone Control

Description

Professional 4-Port Remote Power Switch - Phone Control + Web Control
This premium network-controlled power switch provides remote/central management of AC power distribution through LAN, WAN/Internet or telephone.
It is designed for power tasks such as distant power reboot, equipment power on/off control, web/network administration, power event scheduling, power event alerts.
Other benefits from employing this intelligent power distribution system including:
reduction of server/data center downtime and labor costs with remote power control.
remote power source management and power reboot of crashed systems
network equipment monitoring and power rebooting through auto-ping setup
real-time power consumption monitoring
setup of power event alert message sent through emails, SMS text messages or SNMP trap notification
avoids power surges and UPS overloads by controlling power-on and power-off sequences.
auto-reboot the failed network devices.
Administrators can control network devices or power equipments from any locations within local network or internet and saves trips of technical personnel. Eliminate service calls, system blackout down time and increase reliability.
Equipment Protection / Energy Savings
Protect sensitive devices or valuable equipment can be protected by keeping them powered off when not in use. Great for energy related or network application by powering down equipments when not needed for power savings and to save on wear and tear or powering up environmental system.
Independent Control of Power Ports
Each AC power outlet can be independently powered on, off or power cycle for an immediate reboot, time-delayed reboot and power event scheduling.
Users can have complete control of when and how powered equipments are restored restored with a time delay or scheduled for On/Off shutdowns to conserve energy in the data center.
Designed for high voltage resistance and protection for leakage of electrical currency with 15 Amp total max current output.
Power Control By Web + Phone Keypad + RS232 Console
One major advantage of this remote power is its telephone control function. When networks lock up or no internet connection, users can still control the power switch using the phone keypad to command the connected power devices. Administrators can always gain access to their powered devices by calling into this remote power switch from anywhere in the world.
Other than the Ethernet and PSTN phone line connection, this power controller also offer RS232 console port for using the HyperTerminal protocols to control control power on/off/reboot.
Advanced Web-Based Control Operation
Its intuitive web control panel provides various important power control functions including remote power scheduling, remote power setting and remote power status report, which can all be accessed via internet or local network:
Advanced Power Operation Scheduling
This unit can perform power operation at any specific moment or on daily, weekly or monthly basis. .
Arrange Power-Up Or Shutdown Sequence With Timed Delay
Supports power cycling sequence with priority so each power outlet can be turned on/off or rebooted with timed delay to prevent all power devices from starting up simultaneously to cause sudden overload.
Auto Ping For Automatic Reboot Of Crashed Systems
The auto-ping function will automatically monitor the network equipment. If the device failing to respond the ping request over the user-defined condition, a timely reboot will be performed with alert email sent.
Secure User Access Control
This intelligent power switch supports multiple users access with password security. Manager can assign permissions for each user to access all or only the power outlets assigned.
Remote Control Mode
Web control through intuitive web browser Interface.
Telephone control through phone keypads with control access.
Local Control Mode
Master power on/off button allows manual override from the local site.
Console Control - the built-in RS232 console port can be connected to a local terminal for controlling the switch when network connection not available.
Switch On/Off Powered Device Via Phone
This intelligent power controller is also a telephone-controlled remote AC power switch. Anyone from anywhere in the world can call into this power controller for operation and work through using telephone key pad.
When the network service is down or not available, this smart power controller can still turn power on/off or reboot the connected powered equipments by calling into the power switch for full operation.
Administrator can assign security pass codes to any authorized personnel to have phone control over the the power switch.
This power switch will pick up the phone after a pre-defined number of rings. Entering the pass code on the phone through the keypad after being prompted, users can perform the following 4 tasks:
Controls the 4 power outlets' operation (ON/OFF or reboot)
by pressing "1" from the phone keypad.
Reports the total electrical current load
by pressing "2" from keypad.
Reports the temperature
by press "3" from the keypad.
Reports the current IP address of the remote power switch
by press "4" from the phone keypad.
Each command entry by phone will be confirmed with machine voice to echo back the user's selection and the current outlet power status after entry made.
Monitoring Power Load
This PDU unit allows remote monitoring of total amperage draw on the connected powered devices.
This power solution is SNMP-based so that alerts can be sent automatically by email or SMS text, if SMS server is deployed, to manager when amperage or temperature levels exceed established thresholds.
Multiple Safety Self-Protection
This intelligent power switch provides 3 different system shutdowns for safety measure:
System Shutdown By Current Overload:
this remote power switch will be automatically shut down by its internal circuit breaker for responding to a current overload or short circuit condition.
System Shutdown By Temperature:
ths remote power switch has a temperature sensor built in for detecting the surrounding environment temperature.When the temperature reaches the preset value and lasts for preset time interval, the power switch will be shut down automatically. Also this power switch can be automatically turned back on again after it cools down to preset temperature point.
System Shutdown By Manual Push Button:
A master power on/off button on the switch box itself for local operator to override the remote control mode and take control of this power switch in an emergency.
Power Event Alert Notification
Warning alerts can be programmed to be sent out right after critical power conditions occur so manager can take preventive measures if needed.
The alert message can be generated automatically via emails, SMS text messages or SNMP trap notification according to the pre-set conditions.
Alerts will be sent in response to the following power events:
Ping failure on the network devices
Device temperature rising above the preset value
Electrical short circuit and current overload
Support HTTP Commands And API Functions
This remote power switch also provide API function and HTTP commands for software engineers to develop customized power management applications and build integration with other programs for monitoring power status and performing desired power operations.
1U Rack Mount Ready
This remote power switch can easily be mounted on a standard 19" rack by purchasing the optional rack mounting ears from us.
The rack mounting ears are sold separately.
Professional IP-addressable power distribution unit with built-in web server with 4 AC outlets.
Remote management of
AC power distribution through LAN, WAN/Internet, RS232 console port or telephone.
All power outlets can be independently controlled locally and remotely.
AC outlets from the power switch can be
turned on/off, power cycled for a immediate reboot or reboot with timed delay, power cycle sequence with assigned priority and power event scheduling.
Complete power control via
web, network, telephone, PC RS232 terminal or On/Off button
on front panel.
Real-time monitoring of amperage draw and site temperature
through the internal sensor and current meter.
Manual power on/off button
to override the existing power status and gain immediate control from local access.
LED displays for power status, total current and control mode indication.
Power-up sequence with priority so connected equipments can be started up in proper sequence and prevent sudden overloading.
Easy web scheduling
for power operations performed on specific outlet daily, weekly or monthly.
Supports
API functions, HTTP/HTTPS and RS232 serial port control commands
for engineer to develop customized power management applications and build integration with other programs
.
Featured with
2 Com ports for long distance control or sync control with 2nd PDU through daisy chain connection
.
1024-bit SSL security encryption
.
IP and MAC filtering to restrict the operation computer of devices.
SNMP (V1/ V2/ V3) and SNMP Trap support
.
Supports
Wake- On-LAN protocol
for remotely starting up computers.
Software safe shutdown
help terminate running applications before powering off the computers or data servers.
Auto
-Ping function
for detecting any failed network equipment and performing timely reboot or other power controls.
IP filter/mask function with access management helps prevent unauthorized users' access.
Early warning alert sent by email, SMS text message or SNMP Trap to notify authorized personnel.
15-AMP circuit breaker protection
to avoid power overload and protect connected devices.
1U rack mount ready
. The 19" rack mounting ears are optional and purchased separately.
Designed for high voltage resistance and protection for leakage of electrical currency.
Network Interface:
Ethernet RJ45 port x 1
Phone Interface:
RJ11 port x 1
Power Outlet Plug:
NEMA 5-15 3-Prong
AC outlet x 4
Console Interface:
RS-232 serial port x 1
Frame Type:
19" standard frame
Power Protection:
15 Amp circuit breaker
LED Indicators:
On/Off Status: 4 Green LEDs for 4 outlets
Control Mode: 1 Green LED for LAN mode and 1 Orange LED for phone control mode
Current Meter: 2-digit LED display panel for showing the current amp reading
Network Protocol Supports:
Supports TCP/IP, UDP, SNMP, DDNS, SNTP, HTTP, HTTPS protocols.
Web server design with control through LAN/WAN network.
Supports fixed and dynamic IP address.
Supports NTP (Network Time Protocol ) - synchronize the time of the power controller to the Internet web time .
Supports DHCP and alternate ports for Web Access
Security password identification to ensure system stability.
SNMP (V1/ V2/ V3) and SNMP Trap support.
Input Voltage Support Range:
85V to 264V AC
Voltage Frequency Range:
47-63Hz
Max Rated Current Output:
15.0 Amp max total for all 4 outlets
10.0 Amp max per each power outlet
Operating Temperature:
32-140 degree F
Dimension:
332 x 153 x 44 mm (W x D x H)
Power Consumption:
7W
Remote power switch unit
AC power cord x 1.